Im pretty sure mine are 80 (ball valves) i dont see it being a big deal gor the gate since he's going to be restricting flow to maintain siphon
330 gallon setup and sump build
- Thread starter jvc66
- Start date
Im pretty sure mine are 80 (ball valves) i dont see it being a big deal gor the gate since he's going to be restricting flow to maintain siphon
Which one did you use?
jvc66 screw those pond boxes.....filthy bro. Just spend two hrs cleaning the sump....still not done.
I can only imagine after what my old fx5 used to look like. Screw that lol
Mine are KBI. Spears brand are also well known quality brand, but don't overthink it. Go with whatever you like.
Not the greatest shots, but just to give you an idea of the ATO. Straight forward but let me know if you have questions.
Not the greatest shots, but just to give you an idea of the ATO. Straight forward but let me know if you have questions.
I've seen this comment several times when researching the Jebao pumps. For some reason, some of the pumps get put in the wrong boxes. I would say you probably got a 9000 pump in a 12000 box. Definitely frustrating but in all the cases I saw where this happened, everyone got it straightened out and got new pumps that were the correct ones. It probably has to do with all of the pumps being basically the same size. Pretty easy to get them mixed up at the factory then and put them in the wrong box.
Sump looks nice and clean. But I have seen those spears brand somewhere. Will take a look. Do you remember where you got the gate? And I see what you did with the ATO. Looks like 5gallons?
Frustrating for sure. Would be helpful if they were different sizes for easier identification like you said. I sent an email to the Amazon seller yesterday so I would expect a response either tomorrow or Tuesday latest.
Here's a link to slice gates....
http://www.lesliespool.com/valves-b...erra-gate-slice_valves/pool_parts_product.htm
http://www.lesliespool.com/valves-b...erra-gate-slice_valves/pool_parts_product.htm
Perfect thanks. Did you know how much clearance you had under your tank from your sump yesterday? Forgot to ask
Many use Spears, but they can be relatively pricey. I cannot remember where I got my KBI. I want to say from my builder. Amazon also has Spears but only seen in schedule 80, but I know they also make 40 if that matters. There are other brands on Amazon...made in usa as well if you care and is around $23.
Yes 5 gallon, ATO pump sits inside with tube from pump to return pump chamber where the "Optical Eye" is attached no parts to get stuck.
10 1/2 inches clearance. That's been plenty for me. Keep in mind, I set mine up so I wouldn't have to be under there very often. All I've ever done in 2 years now is change 4 filter socks every 2-4 weeks. One time, I drained and vacuumed the whole thing to get 20 Midas fry out of it, and I had plenty of head room under the stand to do that, too.
I have no plants growing under my stand, no chambers in my sump, no K1 and air pumps to change/aim/adust. I have a powerhead in the sump that keeps it all flowing, so there's nothing on the bottom of it to vacuum out--I don't clean it ever. So your needs may vary if you do more things in your sump than I do which most people do.
