My 1200g indoor pond build
- Thread starter BigLinc
- Start date
If you get a big enough stock tank, a bio-tower will fit.
Heck, just about any thing will be able to be housed in the sump away from the kitty(s).
Heck, just about any thing will be able to be housed in the sump away from the kitty(s).
Satan's Goldfish;3681155; said:Looking good, nice work.
Explain again you thinking for filtration now, i got confused
yeah i confused myself for a minute but here is what i ended up doing, hope it works
i got a 60g stock tank with two 2" drains being fed by 1.5" with a 3700gph pump which im sure is over rated plus about 4' of head and a few 90s i hope it works out, i put in a ball valve just in case
been working on the plumbing most of the day and im almost done, progress is slow working by myself and having broncitis and a ear infection but i just cant stand sitting on the couch with out having all this running so i will have pics up soon
tskemble;3680014; said:
i cant wait to have him, you'll be more then welcome to come see him whenever you want
i will let u know as soon as the cycle is over, hope it goes quick
yayfish24;3681571; said:
i quit counting at $550 and sence then ive got the plumbing and bio media so id say around $650
OK so the plumbing is complete and the filter is running with just bonded filter pad until the bio media gets here tomorrow, ordered 4cu.f. of filter foam, cost $62 shipped
let me know what you think of my design, i just did what i thought would work, i havent checked many threads on filtering so this is pretty much just what was in my head
Two 2" drains, one from the front and one from the back
Did a spray bar of sorts instead of a drip tray, not sure if one is better then the other but it should get the job done
Topping off with my R/O supply line, eventually going to plumb in a dedicated line with a ball valve for top offs, also have my xp4 running
let me know what you think of my design, i just did what i thought would work, i havent checked many threads on filtering so this is pretty much just what was in my head
Two 2" drains, one from the front and one from the back
Did a spray bar of sorts instead of a drip tray, not sure if one is better then the other but it should get the job done
Topping off with my R/O supply line, eventually going to plumb in a dedicated line with a ball valve for top offs, also have my xp4 running
what i have right now is three oscars and a rtc, also have three 18"+ pacus at the LFS waiting to come to a proper home and adopting a TSN
i cant wait to get everybody in
i cant wait to get everybody in
