I dont think 10x turnover is unreasonable at all. What size drains are you planning again? If youre shooting for 4800+ gph you might want to go with 2" drains.
I dont think 10x turnover is unreasonable at all. What size drains are you planning again? If youre shooting for 4800+ gph you might want to go with 2" drains.
It won’t matter with 3/4 inch returns and that one pump he’s going to get no where near 3000gph. It’ll be around 1500 at best. For 3 to 4 thousand gph should run 2 2 inch siphons and 2 inch return plumbing
different tank, that one was from FTD...
Good to know FTD did not have my GPH intrests at heart....
Getting 8’x4’x30”
You can attempt to achieve 10x turnover rate with your return pump(s) but it is completely unnecessary and inefficient. 3-5x is adequate in most freshwater aquariums. If you want more flow in the tank you can use a couple wavemakers or a closed loop pump.Do you have something against the Jeabo pump? I have used them for years and have never had a problem I also use their wave makers and never had a problem. For what you pay for the other pump you could probably get the Jeabo cheaper. And it’s adjustable from 30- 100% of its flow. I’m going to use that for my return home and I’m also using one for my algae scrubber. $150 for an 18,000 Lph adjustable pump is not bad And I think you get the 20,000 for under 200. They also have a very good head height
You can attempt to achieve 10x turnover rate with your return pump(s) but it is completely unnecessary and inefficient. 3-5x is adequate in most freshwater aquariums. If you want more flow in the tank you can use a couple wavemakers or a closed loop pump.