48x48 Workhorse "The Rig"
- Thread starter JK47
- Start date
Thanks bro! You’ll see this setup this weekend. Should have it back running by then
We left off last night with the exterior sanded/buffed.
My boy decided he was going to tackle the interior buffing himself and downright nailed it!
Acrylic = done
My boy decided he was going to tackle the interior buffing himself and downright nailed it!
Acrylic = done
Thanks Thomas. Yeah that bugs me too but it was no tank or deal with it. I considered doing a black acrylic “skirt” around that area but can live with it as is. Im kicking myself for not flame polishing. Live and learn I guess
Easy there you perfectionist! 95% of us can’t even come close to setting something this dope up. Here you are worrying instead of posting pics! Haha jk
BRS order came through to finish off a few things. The intake strainers on the towers had two temporary ones that didn’t fit from when we swapped the design.
Those are correct now. That would suck changing them out with K1 later
The area between the towers is a great way place to tuck in some gear so we put the heater return here.
The wide loc line return is to provide surface agitation.
Those are correct now. That would suck changing them out with K1 later
The area between the towers is a great way place to tuck in some gear so we put the heater return here.
The wide loc line return is to provide surface agitation.
