I dont know if the gap will "seal" up when it filled with water but I rather not take the chance. Have anyone overcome such a gap before without any precatuions?
Fish Room Build Thread
- Thread starter VRI
- Start date
I dont know if the gap will "seal" up when it filled with water but I rather not take the chance. Have anyone overcome such a gap before without any precatuions?
Don't fill it up, it could crack the bottom pane of glass. I think you need to replace that whole sheet of styrofoam unfortunately.
I have ordered sumps and they will be done in 1-2 weeks. I'll do baffle less and just use poret foam as divider. The actual bio area will be 100 liters / 26 gallon filled with Poret and Matrix and the tanks themselves are 300 liter / 80 gallon.
In the "pump compartment" I´ll fit an additional pump which will feed a moving bed filter with K1, at least for the stingray tank. I´ll probably use 2 x Eheim 2260 for the smaller tank as the plans are for the moment. It will be drilled with dual 20mm overflows for the drip overflow with adjustable height.
Sorry about the pics and their untranslated pictures.
In the "pump compartment" I´ll fit an additional pump which will feed a moving bed filter with K1, at least for the stingray tank. I´ll probably use 2 x Eheim 2260 for the smaller tank as the plans are for the moment. It will be drilled with dual 20mm overflows for the drip overflow with adjustable height.
Sorry about the pics and their untranslated pictures.
Progress pics 2020-09-02
95% of the electrical done. It’s just (and buying) mounting the ambient lighting and connect it and install the exhaust fans. I need to paint the covers black as well ??
Tomorrow we’re on to finishing the outside of the last wall.
95% of the electrical done. It’s just (and buying) mounting the ambient lighting and connect it and install the exhaust fans. I need to paint the covers black as well ??
Tomorrow we’re on to finishing the outside of the last wall.
